GPS Antenna, 3m cable with SMA connector

This GPS Active Antenna is designed to receive and amplify the radio signals transmitted on specific frequencies by GPS satellites and convert them to an electronic signal for use by a GPS receiver. It is suitable for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The GPS Ant comes in waterproof housing, 3m coaxial cable with SMA connector and strong magnet base with a rubber boot on the magnet for scratch resistance. This GPS antenna is the perfect addition for all DEVA Broadcast devices with built-in GPS receivers.
Electrical Data
Frequency (GPS Only)1575.42±3MHz
Frequency (GPS/GLONASS)2696±3MHz
VSWR1.5 max
Bandwidth20MHz min @-10dB
Axial Ratio3dB max
Peak Gain4dBic min @0°
Gain Coverage≥ -4dBic @-90° ≤ θ ≤ 90° (over 75% volume)
LNA/Filter Module
Frequency Range1555 to 1615MHz
Module Gain29dB typ.
Moise Figure0.9dB max
Output VSWR2.0 max
Output Impedance50Ω
Operation VoltageDC 2.7 to 5.5V
Current6 to 11mA
Mechanical Data
Weight (without Cable)42g
Size48 x 40 x 13mm
MountingMagnetic base
RF Cable3m with SMA connector
Operating Conditions
Working Temperature-40°C to +85°C
Storage Temperature-50°C to +95°C
VibrationSine Sweep, 1G(0-P), 1-150-10Hz each axis
Humidity95 to 100% RH