AC Power Supply 12V/2A - North America

Switching wall mount power supply. Output voltage 12V, Output current 2A, Power 24W, Wide range input 90-264V, Plug W2 for use in North America. Output Connector 2.1x5.5, Cable length 1.8 m.
Voltage DC12V
Loading0 to 0.5A
Max Power6W
Ripple & Noise200mV p-p
Connector2.1 x 5.5 x 11mm
Voltage90 to 264 VAC
Frequency47 to 63 Hz
Current0.5A rms@ AC low line input and DC output full load
Inrush Surge Current (cold start)30/60A max. @ power supply cold start, ambient temperature 25°C @115Vac/230Vac nominal AC input.
Leakage current<0.25 mA Max
Over current/Short protectionThe power supply will self-protect any output to ground & auto recovery when abnormal circuit faults remove. An output short circuit is defined as any output impedance less than 0.1Ω
Over VoltageThe power supply will be auto recovered when faults remove
Input protectionF1 1A/250V Fuse. The power supply shall be protected against power line surges and any abnormal condition
No Load protectionThe power supply is provided with no load operation to prevent the power supply and system from damage
Protection classII
Dielectric Strength (HI-POT)Primary to Secondary:3000VAC 10mA/60S
M.T.B.F500,000 Calculated Hours at 25°C, by Telcordia SR-332
Cable Length1830mm (6 feet) standard 2 wire cable or as required
PLD (power line disturbance)Line power surge | Line voltage SAG-more info on request
Cooling methodNatural Convection Cooling
Housing materialPC or PPO
Temperature coefficient <±0.5%/°C
Temperature0 to 40°C
Humidity8 to 90% RH non condensing
StandardsCE | cULus | FCC | CB | PSE | BSMI
CE-LVD2014/35/EU; EN 60950-1:2006+A11+A1+A12+A2
Size and Weight
Shipping Weight 75 x 34 x 43mm / 50g